Standard models are shipped with Rubber Faceplates pre-installed. Add “K2” to the end of our part number for Faceplate/Rivets/Adhesive etc. included but not pre-installed. This is highly recommended if you intend to sandblast, Linex or Powder Coat the pushbumper etc.
Most models are available with special options including:
1) UHMW (Black) or HDPE (white) faceplates recommended for trucks used to push vehicles daily. Standard thickness is ½” but others are available by request.
2) 2” or 2 ½” Receiver built in.
INTERNATIONAL PUSHBUMPERS
The IDEAL Rapid Clearance Tool
Clear the Roadway Quickly & Safely and
GET TRAFFIC MOVING FAST!
Pushbumpers computer designed & manufactured for Incident Management and Emergency Response Vehicles including Tow Trucks, Road Service Trucks, Ambulances, Police Trucks, Fire Trucks, Bomb Squad Trucks, Swat Team Trucks and Homeland Security Trucks.
Each standard model includes Heavy Duty Rubber Faceplate attached with Custom Stainless Steel Rivets, Adhesive and Heavy-Duty Adjustable Bolt-on Mounting Bracket/Installation Kit. Most also include Tow Hook Access Openings and Air Flow Openings.
All models are A-36 Steel, extensively reinforced for durability under extreme conditions. They are easy to install and dipped in primer to cover all surfaces. We do not provide any finished painting.
Standard models are shipped with Rubber Faceplates pre-installed. Add “K2” to the end of our part number for Faceplate/Rivets/Adhesive etc. included but not pre-installed. This is highly recommended if you intend to sandblast, Linex or Powder Coat the pushbumper etc.
Most models are available with special options including:
1) UHMW (Black) or HDPE (white) faceplates recommended for trucks used to push vehicles daily. Standard thickness is ½” but others are available by request.
2) 2” or 2 ½” Receiver built in.
DPM Part # | International Pushbumpers w/Installation Kits | PB Profile Height | Weight | Tow Hook Access | Air Flow Openings | Full-Sized Grille Guard | Installation Bracket Kit |
---|---|---|---|---|---|---|---|
PB-5200-1 | International MV607 2023+ | 17" | 275 | yes, 2 | yes | no | 4-point |
- | |||||||
PB-5100-1 | International MV 607 2021-2022 with 9L engine only | 17-18 ½” | 293 | yes, 2 | yes | no | HD 2-point |
- | and most Durastar 4400's from 2011-2022 | ||||||
FOR DUAL Radiator/Tow Hook Mounting Brkt Extensions ONLY | |||||||
- | |||||||
PB-5000-2 | International MV 607 with B6.7L engine and most 2011-2022 Durastar 4300/4300LP | 17 ¾-19 ¾” | 254 | yes, 2 | yes | no | 2-point |
FOR PASS SIDE ONLY Radiator/Tow Hook Mounting Brkt Extension) | |||||||
- | |||||||
PB-2550-1 | International CV 2x4 (2019+) (Same as 2019+ Chevy 4500/5500/6500) | 17" | 262 | yes, 2 | yes,1 | no | 4-point |
PB-2550T-1 | International CV 4x4 (2019+) (Same as 2019+ Chevy 4500/5500/6500) | 20" | 293 | yes, 2 | yes,1 | no | 4-point |
- | |||||||
PB-5000-1 | International Durastar 4300 (2008-2010) | 17 ¾-19 ¾” | 254 | yes, 2 | yes | no | 4-point |
w/PASS SIDE ONLY Radiator/Tow Hook Mounting Brkt Extension) | |||||||
- | |||||||
PB-8100-1 | International Durastar 4300 (up to 2007) | 17 ¾-19 ¾” | 254 | yes, 2 | yes | no | 4-point |
w/NO Radiator/Tow Hook Mounting Brkt Extension) | |||||||
- | |||||||
PB-5150-1 | International Terrastar | 14" | 190 | yes, 2 | yes | no | 4-point |
- | |||||||
PB-8505-2 | International Low Pro 4600/4700/4900 | 14” | 160 | n/a | no | no | 2-point |
PB-8770-2 | International 4600/4700/4900 | 17 ¼” | 197 | n/a | no | no | 2-point |